Внезапно DVD-RW после нескольких лет успешного использования и тысячи записанных дисков перестал записывать, выдавая (в Nero) ошибку "привод недоступен" на 1%, запарывая тем самым болванки, если предварительно не был включен режим симуляции. Ок, допустим, спустя такое количество времени привод мог выйти из строя - подумал я и пошел за новым приводом, благо они, в отличие от видеокарт и винчестеров, в цене не растут. Купил - а он такую же ошибку выдает, вдобавок еще и завешивая Nero.
Получается, что наверняка проблема была не в самих приводах, учитывая то, что я их ввиду отсутствия свободных шлейфов подключал нестандартным способом (через IDE & S-ATA USB 2.0 переходник). А может и в регистре что-то подправить надо.
Так или иначе, прикрепляю к сообщению два Nero-лога - от старого IDE-шного Pioneer'овского привода и нового SATAшного Samsung'овского. Может кто сможет помочь, а то ситуация изрядно нервирует уже долгое время.
Update. На случай, если влом логи качать:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <TSSTcorp CDDVDW SH-224DB>Version: SB01 - HA 1 TA 4 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 768kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class:
CD-ROM: <LGH F0HAB8D >Version: 1.03 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD10EADS-00M2B0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST2000VM003-1ET164 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : ASUS DVD-E616A3T atapi Port 2 ID 0 DMA: On
OtherPeripheral : __RAID___DUMMYDEVICE________ vdrv1000 Port 4 ID 0 DMA: Off
CdRomPeripheral : VXDV BD-HD-DVDROM S1010.0 vdrv1000 Port 4 ID 1 DMA: Off
CdRomPeripheral : LGH F0HAB8D 1.03 a0f4p2jo Port 5 ID 0 DMA: Off
CdRomPeripheral : IBEB S96RO5EB0D 3.5Z ae3ns6jc Port 6 ID 0 DMA: Off
CdRomPeripheral : SI (KOR)DVD-ROM CRD-510B1.00 cdspacex Port 7 ID 0 DMA: Off
=== CDRom-Device-Map ===
LGH F0HAB8D I: CDRom2
TSSTcorp CDDVDW SH-224DB J: CDRom4
IBEB S96RO5EB0D K: CDRom3
SI (KOR) DVD-ROM CRD-510B M: CDRom5
ASUS DVD-E616A3T N: CDRom0
VXDV BD-HD-DVDROM S10 O: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 199MB (204704kB)
Memory in use : 94 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.12.2014
ﾏ裲・UDF
16:30:11 #1 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Revision : 1.02
UDF Partition Type : physical
16:30:11 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
16:30:11 #3 Text 0 File Reader.cpp, Line 124
Reader running
16:30:11 #4 Text 0 File Writer.cpp, Line 113
Writer J: TSSTcorp CDDVDW SH-224DB running
16:30:11 #5 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
16:30:11 #6 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2277279 (506:03.54, 4447MB)
16:30:11 #7 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
16:30:11 #8 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: TSSTcorp CDDVDW SH-224DB, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
16:30:11 #9 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:30:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2277280 (2277280) = #2277280/506:3.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2277280 blocks [J: TSSTcorp CDDVDW SH-224DB]
--------------------------------------------------------------
16:30:11 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [J: TSSTcorp CDDVDW SH-224DB] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4663869440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2277280 | lead-out | 1 | 0x41 | 0x00
16:30:11 #12 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
16:30:11 #13 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
16:30:11 #14 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
16:30:11 #15 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
16:30:11 #16 Phase 32 File dlgbrnst.cpp, Line 1724
Simulation started at 6x (8310 ﾊ・・
16:30:11 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:30:11 #18 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
16:30:11 #19 Text 0 File MMC.cpp, Line 21541
Set BUFE: Super Link -> ON
16:30:11 #20 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
16:30:11 #21 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16:30:14 #22 Text 0 File Cdrdrv.cpp, Line 1195
16:30:14.515 - J: TSSTcorp CDDVDW SH-224DB : Queue again later
16:30:14 #23 SPTI -600 File SCSIPassThrough.cpp, Line 306
CdRom4: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 40 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0aab0000: Len x10000
0x09 00 02 00 6C 00 01 00 E4 C6 76 00 40 00 00 00
0xB4 10 DE 07 0C 10 10 1E 0B 00 00 00 01 00 00 00
0x00 00 00 00 00 00 00 00 26 00 00 00 00 00 00 00
16:30:14 #24 CDR -600 File Writer.cpp, Line 302
Device not available
J: TSSTcorp CDDVDW SH-224DB
16:30:14 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
16:30:15 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
16:30:15 #27 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 63
16:36:42 #28 SPTI -600 File SCSIPassThrough.cpp, Line 306
CdRom4: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x03c15a00: Len x48
16:36:43 #29 CDR -600 File WriterStatus.cpp, Line 167
Device not available
J: TSSTcorp CDDVDW SH-224DB
16:36:43 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
16:37:48 #31 Phase 34 File dlgbrnst.cpp, Line 1724
Simulation failed at 6x (8310 ﾊ・・
16:38:21 #32 SPTI -600 File SCSIPassThrough.cpp, Line 306
CdRom4: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 08.03.2007 2:51:00
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.1999 12:06:00
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 05.10.2004 23:00:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.93.0, size=45648 bytes, created 04.03.2011 22:44:14 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
