Привет всем. Собрал картридж ревизии 6.4, скомпилировал исходники Кластера с гитхаба, прошил.
При запросе информации о картридже выдает предупреждения :
C:\famicom-dumper>famicom-dumper info-coolgirl --port COM7
Famicom Dumper Client v3.4
(c) Alexey 'Cluster' Avdyukhin /
https://clusterrr.com / clusterrr@clusterrr.com
Dumper initialization... OK
Dumper hardware version: 3.2
Dumper firmware version: 3.4
Reset... OK
Primary algorithm command set and control interface ID code: 0202h
Alternative algorithm command set and control interface ID code: 0202h
Vcc logic supply sinimum program / erase voltage: 0,2v
Vcc logic supply maximum program / erase voltage: 3,6v
Vpp [programming] supply minimum program / erase voltage: 0,0v
Vpp [programming] supply maximum program / erase voltage: 0,0v
Typical timeout for single byte/word/D-word program: 0us
Typical timeout for maximum-size multi-byte program: 0us
Typical timeout for individual block erase: 0ms
Typical timeout for full chip erase: 262144ms
Maximum timeout for single byte/word/D-word program: 0us
Maximum timeout for maximum-size multi-byte program: 0us
Maximum timeout for individual block erase: 0ms
Maximum timeout for full chip erase: 524288ms
Device size: 128 MByte / 1024 Mbit
Flash device interface: 257
Maximum number of bytes in multi-byte program: 2
Erase block region #0:
- Sectors size: 197376 Bytes
- Sectors count: 1024
WARNING: Secured Silicon Sector Protection Bit is set!
WARNING: Persistent Protection Mode Lock Bit is set!
WARNING: Password Protection Mode Lock Bit is set!
Done.
Флеш память перепаял, не помогло
Может у когото есть рабочий pof - файл для прошивки плис, картридж ревизии 6.4.
Поделитесь пожалуйста
