Обновится эмулятор восьмибитных компьютеров Atari - Altirra.

[changes]
- Display: Due to change in bloom algorithm, bloom settings have been reset to avoid conflicting with earlier versions

[features added]
- Cartridge: Added support for J(atari)Cart (104-111) and DCart (112)
- Cassette: Added Vorbis decoding support
- Cassette: Added support for paired .data.cas+.audio.ogg files for more compact tape storage
- Cassette: Added Turbo D support
- Cassette: Added FSK speed compensation and crosstalk reduction options
- Command Line: Added /cleardevices, /adddevice, and /removedevice switches
- CPU: Added 23x multiplier option for 65C816 mode
- Debugger: Added keyboard shortcuts to memory window
- Debugger: Ctrl+Alt+click now reports scrolling offsets, pixel addresses, and VBXE information
- Debugger: Added .vbxe_xdlhistory command
- Debugger: .diskdumpsec command can now display INTERNAL text
- Debugger: FDC and DISKEMU logging channels are now off by default
- Devices: Added Microbits MPP-1000E modem
- Devices: Added parallel-to-serial adapter device
- Devices: Added 820, 825, 1020, 1025, and 1029 printers
- Devices: Added Remove/Settings commands to context menu
- Devices: Added 850 printer port support
- Devices: Added $D600-D63F address range option for Covox
- Devices: Added option for PBI-based CIO devices instead of using a hook page
- Disk: Super Archiver emulation now supports slow speed
- Disk: Added emulation of the BitWriter add-on for the Super Archiver
- Disk: "Show disk image file" drive menu option now works for mounted images within .zip archives
- Disk: ATX double density support is now enabled by default
- Disk Explorer: Added MAC/65 file viewing mode
- Display: Added support for deinterlacing interlaced video
- Display: Added color correction support for targeting displays that use raw gamma 2.2 or 2.4 instead of sRGB
- Display: Added emulation of long-persistence monochrome monitors
- Display: Enhanced CIO text mode rewritten with screen editing, control character, and pass-through support
- Display: Added adjustable PAL phase
- Input: Light pen/gun is now insensitive to dark areas on screen
- PerfAnalyzer: Added import support for Atari800 5.x monitor traces
- PerfAnalyzer: Add "Go To Tape Editor" option when right-clicking on tape channel
- Printer: ATASCII special characters are now converted to Unicode equivalents
- Printer: Generic Printer (P:) device now supports translation modes for port output
- Simulator: Added a speed option to take periodic rewind snapshots
- Tape Editor: Added Select All (Ctrl+A) and Deselect (Ctrl+Shift+A)
- Tape Editor: Added FSK spectrogram view option
- UI: Added screen reader support for word granularity
- UI: Improved screen reader support in message boxes
- UI: Added option to force program to efficiency or performance cores
- UI: Added tool to scan for global hotkeys that block keyboard mappings
- VFS: Improved handling of Unicode filenames within .zip archives

[bugs fixed]
- AltirraOS: Fixed P: compatibility issues with the 1025 printer
- AltirraOS: P: device IDs are supported in XL/XE/XEGS mode
- AltirraOS: K: and C: now support forced read mode (ICAX1 bit 0)
- AltirraOS: Modified cassette routine SKCTL usage for compatibility with PokeyMAX 4
- AltirraOS: Fixed bug where checksum errors were not consistently returned from SIO
- AltirraOS: Improved compatibility of C: handler with block control bytes other than $FA/$FC/$FE
- AltirraOS: Improved compatibility of RBLOKV internal vector
- AltirraOS: Carry flag is now checked for error after invoking cassette boot run address
- AltirraOS: Boot screen is no longer re-displayed after printing Boot Error
- ANTIC: Fixed playfield data read on cycle 106 overlapped with a refresh cycle and a pulled-up data bus
- ANTIC: Added emulation of abnormal DMA caused by turning off playfield DMA mid-line
- ATBasic: Fixed ICAX2Z handling issue preventing printing in sideways mode
- Cassette: Fixed framing errors not being reported from during unaccelerated tape reads
- CPU: Fixed 65C816 BRK instruction writing to wrong addresses in native mode with stack outside of page 1
- Debugger: Register (r) command can now set S high byte in 65C816 native mode
- Debugger: Fixed panes not adapting properly after debug font change if undocked
- Devices: SuperSALT Test Assembly now supports External Audio test
- Devices: Fixed SuperSALT Test Assembly bidirectional clock to audio input path
- Devices: Fixed 8048 timer interrupt bug that prevented the 1450XLD parallel disk controller from shutting off the spindle motor
- Devices: Fixed 32-in-1 handling of Select key and selection is no longer reset when bypassing menu with Esc
- Devices: SIO and CIO acceleration now better supports the Break key
- Display: Fixed incorrect gamma for Adobe RGB color matching mode with screen effect acceleration enabled
- Disk: Adjusted ATX density detection to allow for enhanced density disks with no non-boot sectors on track 0
- Disk: Fixed handling of DRQ bit when reading double density ATX disks
- HLE: Improved overflow handling accuracy of FP acceleration handlers
- IDE: Read Verify command fixed
- Input: Keyboard input bindings are now released on key up even if Alt is pressed down in between the key down and key up
- Printer: Fixed printer output going to printer window instead of printer port with P: CIO hook enabled
- Save States: Fixed issue where sometimes P/M graphics would be missing after loading a state if P/M DMA was disabled
- SCSI: Accept but ignore vendor command $0C to work around MIO 1.1 firmware issue
- Simulator: Fixed issue where internal BASIC could sometimes be enabled on a 1200XL
- Tape Editor: Reduced CPU overhead when updating checksum status with SIO decoded data capturing enabled with large blocks
- Tape Editor: Fixed Ctrl+O shortcut
- Tape Editor: Improved baud rate determination when converting to standard blocks
- UI: Added workaround for blank window label on Windows 11 taskbar
- UI: Added extra checking for Explorer's extended archive support, which doesn't support normal drag and drop interfaces
- UI: Fixed bug where changing the hardware type in Configure Settings could also switch profiles
- VBXE: Overlay and attribute map addressing are no longer reset at vertical blank
- VBXE: Added emulation of one-scanline vertical offset for NTSC

Обновился эмулятор GBA - mGBA.

Emulation fixes:
- GB Audio: Fix audio envelope timing resetting too often
- GB I/O: Fix STAT writing IRQ trigger conditions
- GBA GPIO: Fix gyro read-out start
- GBA I/O: Fix HALTCNT access behavior
- GBA I/O: Fix audio register 8-bit write behavior
- GBA Serialize: Properly restore GPIO register state
- GBA SIO: Fix MULTI mode SIOCNT bit 7 writes on secondary GBAs

Other fixes:
- Core: Fix patch autoloading leaking the file handle
- GB: Fix uninitialized save data when loading undersized temporary saves
- GB, GBA Core: Fix memory leak if reloading debug symbols
- GB Serialize: Prevent loading invalid states where LY >= 144 in modes other than 1
- GBA Audio: Fix crash if audio FIFOs and timers get out of sync
- GBA Audio: Fix crash in audio subsampling if timing lockstep breaks
- GBA Core: Fix loading symbols from ELF files if the file doesn’t end with .elf
- GBA Memory: Let raw access read high MMIO addresses
- Qt: Fix crash when applying changes to GB I/O registers in I/O view
- Qt: Fix LCDC background priority/enable bit being mis-mapped in I/O view
- Qt: Fix saving named states breaking when screenshot states disabled
- Qt: Fix potential crash on Wayland with OpenGL
- Qt: Fix installer updates if a version number is in the filename
- Updater: Fix updating appimage across filesystems

Miscellaneous:
- Qt: Make window corners square on Windows 11
- Switch: Add bilinear filtering option
- Vita: Add imc0 and xmc0 mount point support

Обновился эмулятор PlayStation2 - Play!.

- Implemented missing instruction, fixing rendering in some visual novel games
- Fixed regression in JIT that was causing rendering issues in Free Running
- Fixed hanging when skipping intro video in Viewtiful Joe
- Added missing HLE function needed for Mojib-Ribbon
- (Desktop) Changed bootable filtering mechanism
- (Windows) Fixed issue preventing Black Hawk Down from saving properly

Обновился эмулятор Atari Jaguar - BigPEmu.

- Added a script for Raiden touch control. Ship automatically travels to the touch point and auto-fires when held, with a 2-finger tap to trigger bombs
- Added a script for Vid Grid touch control. Drag and drop
- Added a script for Towers II touch control. (with an option to uncap the framerate) In-game menu cursor is touch-driven, 2-finger tap exits the menu
- Added a script for Myst touch control. Hold to drag the cursor, tap to activate
- Added some scripting functionality to allow setting custom read/write handlers for non-RAM/ROM memory regions
- The iOS port now prompts the user to determine their battery/heat versus performance preference on first run. (since we can't just be energy-efficient without the iOS scheduler punishing us, and I'm not having any luck getting anyone to read the FAQ/user manual)
- The iOS port now has a separate "Connected Idle Time" setting, which defaults to 3.0 and is used instead of "Overlay Idle Time" when at least one external device is connected. (workaround for the same FAQ/user manual problem above)
- Added lots of random new scripting functionality
- Fixed game thumbnails rendering at the incorrect scale in portrait mode

Обновился эмулятор Sega Saturn - YabaSanshiro.

Changes in 1.16.6
- simplify fullscreen mode
- Fix: Crash when start fullscreen mode

Changes in 1.16.5
- Auto update function
- Fix: Crash when setting menu is changed
- Fix: Polygons are broekn when restart

Changes in 1.16.4
- Improve the stability issue of Vulkan
- Support 8bitDoM30 and retro-bit SEGA Saturn gamepad
- Reflect device pixel ratio

В раздел «Библиотека» добавлен мануал на русском языке «Metroid II - Return of Samus (Rus)» для GameBoy.